
Pocket Cam Organizer by Video Hook
For DJI Osmo Pocket 3 and Osmo Pocket 4P.
Three pockets for your Osmo Pocket cameras on the pegboard. In the charging version, set a camera down and it charges.
- With charging and without, both in the download.

Charging needs one exact USB-C cable for each camera that charges. The cable is not included.
By buying you agree to the Terms and Conditions, the Refund Policy and the 3D print file license.
Details: the download, what you need, print times
In the download
- The START-HERE guide and the license.
- Test pieces: the hook fit test, the camera fit gauge and the charging test.
- The organizer with hook fit 1, 2 and 3, each with charging and without.
- Three numbered slide-in keys and an optional cord clip for the three cords.
- Every part as a Bambu Studio .3mf, already sliced for the Bambu Lab X1 Carbon, and as a plain .stl for any other printer or slicer.
What you need
- A 3D printer with a bed of 180 x 180 mm or larger, and PLA filament.
- An IKEA SKADIS pegboard.
- For the charging version only: one cable for each camera that charges, up to three. Not included, you buy it separately. The only cable I have tested: LEIRUI Down Angle USB-C, 3.3 ft / 1 m, silicone, the USB 20Gbps version. The link is further down this page, under What you need for the charging versions.
- For the charging version: a certified USB-C charger with one port for each cable.
- The version without charging needs no cable.
Print time and filament (slicer estimates for the Bambu Lab X1 Carbon)
- Charging organizer: about 2 h 50 min, 65 g.
- Organizer without charging: about 2 h 20 min, 56 g.
- Hook fit test: about 50 min, 17 g, for all three pieces.
- Camera fit gauge: about 20 min, 7 g.
- Charging test: about 1 h 10 min, 19 g.
- Slide-in keys: about 30 min, 5 g, for a plate of three.
- Cord clip (optional): about 25 min, 7 g.
Good to know
- The organizer is 119.7 mm wide and 56 mm tall. Front to back with the hooks it is about 72 mm with charging and about 62 mm without.
- In a row with the other parts the sides sit flush. The version without charging is shallower, so its front sits 10 mm further back than theirs.
- The pockets are cut for the bare camera handle, not for a case or a cage. The regular Osmo Pocket 4 has not been tested. Print the camera fit gauge first.
- How it was tested: the pocket size was checked with a printed fit gauge on both of my cameras, a Pocket 3 and a Pocket 4P. The charging organizer is printed in full and in daily use on my own wall with the Pocket 4P.
Charging versions: read what you need and the safety note.





